Please visit our stand at one of the following trade fairs:
IFAT Entsorga
München 07.05.-11.05.2012
Testing Expo
Stuttgart 12.06.-14.06.2012
Achema
Frankfurt a. M. 18.06.-22.06.2012
MSR Spezialmesse
Rheinland
Leverkusen 27.06.2012
MSR Spezialmesse
Südwest
Ludwigshafen 19.09.2012
MSR Spezialmesse
Rhein-Ruhr
Bochum 07.11.2012
Höntzsch news:
Congratulation Polycontrols! Our Canadian agency for the North American countries, Polycontrols Technologies inc., is celebrating its 30th anniversary. Congratulations!
30.04.2012
|
NAMUR working group This year from 26th - 27th April Höntzsch GmbH in Waiblingen will host the NAMUR working group for flow measuring technology under the direction of Dr. Armin Brucker (BASF).
05.03.2012
|
User language JapaneseIn addition to German, English and French, the flowtherm NT in now also available with user language Japanese.Of course, the HLOGII software for configuration, readout and processing of measured data is also availabe in Japanese.
27.02.2012
|
On 01.01.2012, Jürgen Lempp (39), Sales Manager with Höntzsch GmbH, was newly appointed to join the top management with Thomas Itte (Managing Director since 1999). His areas of responsibility are Sales, Repair and Maintenance, Research and Development (Mechanics), Quality Control and Calibration. Thomas Itte is responsible for Human Resources, Finance, Production, Procurement, as well as Development Hardware/Software (Electronics).Jürgen Lempp's career with Höntzsch began in 2003 as Applications Engineer. In 2011 he was assigned Sales Manager and received power of attorney. Before joining Höntzsch he worked for six years at Mattson Thermal Products GmbH in Dornstadt - at first as Service Engineer and from 2001 as Program Manager for Customer ...
09.01.2012
mehr
|
New agency in South Africa
Höntzsch has extended its network of agencies abroad to Africa by entering into an agreement with GFG (Pty) Ltd. GFG is a South African based company and is responsible as of now for sales and service of Höntzsch products in South Africa.
01.11.2011
|
Congratulations!
We congratulate our colleague Arne Taube on the successful completion of his PhD in July this year. As a graduate engineer working in our calibration centre, he earned his doctor title at the Institute of Aerodynamics and Gas Dynamics, Faculty of Aerospace Engineering at the University of Stuttgart.
His thesis "A High-Order Discontinuous Galerkin Scheme for Aerodynamic Applications in Industry" deals with efficiency analysis based on a method of direct numerical simulation of high-efficiency flows.
27.07.2011
|
Gabriele Kunze and Jürgen Lempp receive power of attorney
On Friday 1st April 2001 Mr Jürgen Lempp and Ms Gabriele Kunze were issued with power of attorney. The 39-year old sales engineer has been working at Höntzsch GmbH since 2003 while Ms Kunze (51) has worked as an assistant to the Company Management of Höntzsch GmbH since 1986.
01.04.2011
|
The beginning of 2011 saw the launch of an exciting new product at Höntzsch GmbH - the flowtherm NT- a multifunctional hand-held unit with data logger for measuring flow rate, flow velocity, temperature, pressure and many other variables.
A number of special features render the flowtherm NT user-friendly with a wide range of applications, due to the diversity of the connectable sensors (vane wheel, vortex, thermal, Pt100 and other sensors with analog output). Measuring can be carried out and displayed with up to three sensors simultaneously. The data logger allows up to 40,000 values with date and time to be saved. In addition, up to 100 different profiles for user or measuring point can be stored and ...
01.02.2011
mehr
|
Höntzsch General Manager Uwe Steinhauser has passed away
Our long-standing General Manager Uwe Steinhauser died suddenly and unexpectedly on 11th September 2010. We knew him to be an empathetic, fair and competent person. His death shook us deeply and leaves a big hole in our lives.
The Company management and employees of Höntzsch GmbH
11.09.2010
|
INELEKTRO
We would like to congratulate INELEKTRO on their 45th anniversary!
14.07.2010
|
Solar plant
Since 30th June 2010 Höntzsch GmbH has been producing its own electricity.
Höntzsch has installed a solar power plant on the roof of the building, where 350 solar cells now provide almost the whole energy required for the production of flow sensors.
Due to the solar plant, with a forecast annual output of 29,155 kWh, over 20 tonnes of CO2 are saved each year.
05.07.2010
|
Campaign for World MS Day on 26.05.10
The daughter of our colleague Julie Faust suffers from the incurable disease Multiple Sclerosis (MS).
Höntzsch employees were encouraged on the occasion of World MS Day to donate towards further research into this debilitating illness. Julie has launched a special campaign to raise awareness of MS and to draw special attention to the needs of MS sufferers.
So far more than 1200 Euro has been raised!
For more information please visit: http://beatms.mssociety.org.uk/netcommunity/jusjump
27.05.2010
|
Vortex sensors for CO2 applications
Optimisation of the signal adjustment means that using vortex sensors in carbon dioxide, CO2, is now possible. Carbon dioxide has a wide range of technical applications, for instance, in the extraction of urea, for carbonisation in the beverage industry and as an expanding agent. Höntzsch measuring technology also offers highest precision and cost effectiveness in this field of applications.
|
Vane wheel sensors - ideal for applications in hydrogen
Vane wheel sensors have demonstrated their proficiency in a multitude of demanding applications in conjunction with hydrogen. The gas compositions often change at short notice and the pipelines are filled for neutralisation purposes with inert gases such as argon, nitrogen or carbon dioxide.
To eliminate a potentially explosive atmosphere the accurate flow rate is to be determined irrespective of the actual gas composition. Flow rate measuring with Höntzsch vane wheel sensors is possible in a wide range of applications irrespective of density, pressure and temperature.
|
ATEX Category 3D
A large number of Höntzsch products are now available with ATEX Category 3D Certification ('Dust-Ex').
|
Testing Höntzsch vortex VA and vane wheel FA flow sensors within the framework of CEN TC 264
On behalf of the European Commission, a working group was set up with the objective to define a European Standard determining how velocity and volumetric flows in stack gas in large combustion plants could be measured accurately, reliably and with long-term stability. Höntzsch GmbH is a member of the CEN TC 264 WG23 (Working Group) and also takes part in practical trials of equipment for stationary and portable applications under real conditions. Detailed wind tunnel trials at the Technischen Universität Berlin (TUB) have been successfully completed.
|
SIL Certification for vortex VA flow sensors
The Safety Integrity Level (SIL) evaluates functional safety of electrical, electronic and programmable electronic safety related systems. Vortex insertion probes VA40 and measuring tubes VA Di with integrated transducers are SIL 2 certified. Höntzsch instruments guarantee increased system reliability and production quality.
|
