Thermal Measuring Tube TA Di - for separate eval

Thermal Measuring Tube TA Di -
for separate evaluation unit

Thermal Measuring Tube TA Di - 
for separate evaluation unit

Thermal Measuring Tube TA Di - for separate evaluation unit

Measuring tube TA Di with inside diameter 8, 16, 21.6, 27.2, 35.9 and 41.8 mm. For connection to separate evaluation units like e.g. U10b, flowtherm NT or flowtherm Ex.  

Material: stainless steel. 

Suitable for fixed measuring of standard flow rate NV/t [m³/h], mass flow rate [kg/h], standard volume NV [m³] and standard flow velocity Nv [m/s] in clean, condensate and particle-free gases.

Measuring range

0.6 ... 12.350 l/min or 0.04 ... 741 m³/h

Pressure resistance

up to 16 bar / 1.6 MPa

Media temperature

-10 ... +140 °C

Media

air, (compressed air), nitrogen, oxygen, methane, natural gas, argon, hydrogen, propane, butane, carbon dioxide, helium, sulphur hexafluoride

IP protection type

IP65 (cable side)

Type of protection

with U10b: ATEX category 3G and 3D (zone 2 and 22) (optional)
with flowtherm Ex: ATEX category 2G (zone 1) (optional)

Sensor output

analog output 4 ... 20 mA flow proportional
relay for quantity pulse
RS232 interface