For connection with probes FA/FAR (ZS, ZSR, TS, TSR) and measuring tubes FA Di/FAR Di.
Conversion of actual to standard flow / flow rate.
For ATEX category 2G (zone 1) applications, an additional isolation / suppy unit LDX2 is necessary.
With flow-proportional analog output 4-20 mA, relay (potential-free, two-way contact) for use as limit value, quantity pulse or indication of +/- flow direction.
Self-diagnosis according to NAMUR NE43.
Power supply 12 VDC, 24 VDC or 230 VAC.
Configurable via RS232 interface and UCOM software.
Displayed indicators
actual flow velocity [m/s],
actual flow rate [m³/h] or [l/min], quantity [m³]
IP protection type
IP65
Sensor input
v/FA; v/FAR
Sensor output
analog output flow 4 ... 20 mA or 0 ... 10 V flow-proportional, relay for limit value, quantity pulse or indication of +/- flow direction, RS232 interface
Vane wheel measuring tube with inside diameter 9.7 mm and integrated transducer UFA (optional). …
Cylindrical vane wheel sensor / insertion probe with probe diameter 25 mm and integrated transducer…
Vane wheel measuring tube with inside diameter 18.2 mm and integrated transducer UFA (optional). …
Cylindrical vane wheel sensor / insertion probe with probe diameter 25 mm. Probe materials:…
for connection with vane wheel sensors FA (e.g. ZS, FA Di) and FAR (e.g. ZSR, FAR Di) in Ex-version…
Vane wheel measuring tube with inside diameter 9.7 mm and integrated transducer UFA (optional). …
Cylindrical vane wheel sensor / insertion probe with probe diameter 25/27 mm for applications at…
Vane wheel measuring tube with inside diameter 18.2 mm and integrated transducer UFA (optional). …
Cylindrical vane wheel sensor / insertion probe with probe diameter 30 mm and integrated transducer…
Cylindrical vane wheel sensor / insertion probe with probe diameter 16 mm for applications in pipes…
Cylindrical vane wheel sensor / insertion probe with probe diameter 25 mm and +/- direction sensing.…
Compared to ZS cylindrical probes, TS and TSR probes offer a significantly lower sensitivity to…