Vane wheel system unit UP ASD - Höntzsch

System Unit µP-ASD

System Unit µP-ASD

System Unit µP-ASD - in combination with sensors FA - in top-hat rail mounting

For connection with probes FA (ZS, TS) and measuring tubes FA Di.

Conversion of actual to standard flow/flow rate (optional).

For ATEX category 2G (zone 1) applications, an additional isolation / supply unit LDX2 is necessary.

With flow-proportional analog output 4-20 mA, relay for use as limit value or quantity pulse.

Power supply 24 VDC.

Configurable via keypad with display.

 

Displayed indicators

actual flow velocity [m/s]
actual flow rate [m³/h] or [l/min]
quantity [m³]

IP protection type

IP20

Sensor input

v/FA

Sensor output

analog output 4-20 mA flow-proportional,
limit value or quantity pulse

µP-ASD in LDG 30 housing - U228 Operating Instructions FA in separate LDG30 housing- U147
Vane Wheel Measuring Tube 9.7 mm up to 100 °C

Vane wheel measuring…

Vane Wheel Measuring Tube 9.7 mm up to 100 °C Probe ZS25 ... ZG4

Cylindrical vane…

Probe ZS25 ... ZG4 Vane Wheel Measuring Tube 18.2 mm up to 100 °C

Vane wheel measuring…

Vane Wheel Measuring Tube 18.2 mm up to 100 °C Probe ZS25 ... ZG1

Cylindrical vane…

Probe ZS25 ... ZG1 Isolation / Supply Unit LDX2 (FA,VA)

for connection with…

Isolation / Supply Unit LDX2 (FA,VA) Vane Wheel Measuring Tube 9.7 mm up to 240 °C

Vane wheel measuring…

Vane Wheel Measuring Tube 9.7 mm up to 240 °C Probe ZS25/27 ... ZG2

Cylindrical vane…

Probe ZS25/27 ... ZG2 Vane Wheel Measuring Tube 18.2 mm up to 240 °C

Vane wheel measuring…

Vane Wheel Measuring Tube 18.2 mm up to 240 °C Probe ZS30 ... ZG4

Cylindrical vane…

Probe ZS30 ... ZG4 Probe ZS16 ... ZG1/ZG2

Cylindrical vane…

Probe ZS16 ... ZG1/ZG2